Job Purpose Join our Engine Maintenance Centre، a cutting-edge maintenance facility، where we deliver exceptional Maintenance، Repair، and Overhaul (MRO) services for the engines of Emirates’ fleets

Key Responsibilities

• Continuously update work packs as supplements are added or tasks withdrawn

• Conduct technical reviews of tasks raised by Maintenance Planning to identify task intent، special

• Actively support DBNU reduction for routine tasks by working with Material Coordinators to identify root causes and implement the necessary adjustments to task spares set-ups

• Create maintenance facilitation procedures and tasks as required to support planned maintenance activities

• Highlight first-time tasks، tasks with high man-hour and access requirements، expected defects based on historical trends، and other activities impacting the production workflow as part of the detailed estimate report for each maintenance input

• Continuously update work packs as supplements are added or tasks withdrawn.

• Create maintenance facilitation procedures and tasks as required to support planned maintenance activities.

• Highlight first-time tasks، tasks with high man-hour and access requirements، expected defects based on historical trends، and other activities impacting the production workflow as part of the detailed estimate report for each maintenance input.

Requirements & Qualifications

• Materials Coordination Coordinate with internal and external stakeholders as required to ensure pre-draw requirements، including modification kits، are delivered before engine input and in line with agreed production schedules

• (jacking، defueling، repairs، workshop inputs، test flights، etc.)، dependencies، material requirements، tooling requirements، supporting task cards، and any other information that supports the planning process

• Adjust MQs in UM to align with daily task requirements

• Receive and complete audits of all paperwork prior to CRS، ensuring compliance with EPM and quality requirements

• Maintain and update the estimation database for the Emirates fleet، ensuring all new tasks are broken down by task steps، trade-specific estimated MH، concurrent task requirements، and access panel requirements

• Knowledge & Skills Good understanding of aircraft/engine documentation and records، including Engine Maintenance Manuals (EMM)، Illustrated Parts Catalogues (IPC)، Work Packages، and Maintenance Schedules

• Coordinate with internal and external stakeholders as required to ensure pre-draw requirements، including modification kits، are delivered before engine input and in line with agreed production schedules.

• Adjust MQs in UM to align with daily task requirements.

• Maintain and update the estimation database for the Emirates fleet، ensuring all new tasks are broken down by task steps، trade-specific estimated MH، concurrent task requirements، and access panel requirements.

• Knowledge & Skills

Benefits & Conditions

• Salary & benefits Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world

• Salary & benefits

• Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world

Our integrated team excels in Engine Technical Services (ETS)، Propulsion Planning and Logistics، and more، all within our advanced Engine Shops and Test Cell

With a strong commitment to quality and safety، we streamline processes to strip، inspect، and rebuild engines seamlessly in one state-of-the-art location

Join us to be part of a team where precision and excellence drive every operation

As a Production Planning Officer at EEMC، you will plan، execute، and deliver materials coordination، estimation، work pack preparation، closure activities، and workshop planning within the engine maintenance organisation

You will assist Production Planning Engineers in delivering their

and support the Production team in the execution of maintenance activities

You will ensure all activities are carried out in accordance with the highest standards of airworthiness، safety، quality، and regulatory compliance

In this role، you will: Provide supervision، training، and guidance to reporting team members

Act as deputy to the immediate supervisor when required

Participate in projects to continuously improve Production Planning Services

Provide recommendations on task withdrawals based on part availability and lead times that do not support the planned workflow

Review all material requests for ongoing checks to identify available stock and coordinate deliveries based on order priority

Monitor duplicate requests and cancel or adjust them as required

Determine the best solution for material shortages and coordinate with the Material Organisation / FTM on part basic set-up

Coordinate all Ship Shop Ship (SSS)، Task 2، and repair orders to ensure components are returned to the engine in accordance with workflow plan

or that suitable alternatives are sourced

Ensure all SSS and Task 2 components are dispatched with the required information

Ensure all relevant stakeholders are kept informed of material status throughout the check، particularly for items that may impact workflow execution

Provide daily reports to Production Planning Engineers and production teams

Monitor actual material usage against budget and provide feedback to production teams on opportunities to reduce material costs، including the return of unused parts

Coordinate robbery activities for assigned events، ensuring robbery messages are issued and robbed parts are processed through the virtual robbery store to control R-Class costs

Coordinate all material-related closure activities at the end of each input، including: a

DBNU clean-up and feedback to the Planning Organisation to support future DBNU reduction. b

Review material expenditure، including parts، quantities، and costs، and provide recommendations on future stock levels، contingency spare orders، and unusual ordering trends

Work Pack Management Deliver and supervise the preparation and compilation of work packages for assigned events، from handover by CAMO through to handover to the production team

Ensure all issues identified are followed up with the relevant departments and resolved before the start of each input

Ensure work packages are segregated into work zones and trades in line with the workflow plan to support efficient execution of maintenance inputs

Ensure work packs are displayed in the production area as required

Return any non-compliant paperwork to Production for correction and log it for error reporting

Complete all required system transactions، including task status tracking in the Part-145 task tracking system، task card closure، and work pack closure in UM

Generate a post-check completion report، distribute it to relevant stakeholders، and dispatch completed work packs to Technical Records

Estimation Produce detailed man-hour (MH) estimates for each assigned event to support workflow and manpower planning

Perform defect analysis on completed inputs، focusing on non-routine estimation while considering check type، engine type، age، and in-service issues to determine technical impacts on future layovers

Produce post-input man-hour analyses covering clocking performance and labour utilisation

Review Production Planning feedback discrepancies and support Engineering departments by addressing documentation discrepancies، man-hour variances، and recommending improvements to AMM and other fleet-related manuals

Workshops Ensure all planned work is packaged، segregated into daily activities، and issued to Production

Maintain visibility of daily workload progress and update WO status to reflect material or resource shortages

For SSS and Task 2 activities، highlight major defects and schedule impacts to the Workshop Engineer through effective and timely communication

Coordinate the addition of PNs to the capability list as required

Update and publish daily progress reports

Monitor open WOs for man-hour utilisation، material status، and work progress، updating WO status daily as required

Qualification To be considered in this role، you must meet the below

Diploma in Engineering or Aircraft Maintenance، or Basic GCAA Licence، or Bachelor's Degree in Engineering (Aeronautical، Mechanical، or Electrical). 2.5 years of relevant experience in Aircraft/Engine Maintenance or Production Planning within an airline or third-party maintenance organisation، preferably in aircraft scheduling، maintenance planning، production planning، or a related environment

Candidates holding a Diploma or Basic GCAA Licence must have at least 2.5 years of relevant experience

Candidates holding a Bachelor's Degree in Engineering must have at least 1.5 years of relevant experience

Knowledge of aircraft/engine systems، powerplants، and components

Familiarity with aircraft/engine regulatory

and aviation legislation

Working knowledge of the Ultramain system

Proficiency in Microsoft Office applications

Find out what it’s like to live and work in our fast-paced، cosmopolitan home city in the Dubai Lifestyle section of our website

Job Purpose

Join our Engine Maintenance Centre، a cutting-edge maintenance facility، where we deliver exceptional Maintenance، Repair، and Overhaul (MRO) services for the engines of Emirates’ fleets

Our integrated team excels in Engine Technical Services (ETS)، Propulsion Planning and Logistics، and more، all within our advanced Engine Shops and Test Cell.

Join us to be part of a team where precision and excellence drive every operation.

You will ensure all activities are carried out in accordance with the highest standards of airworthiness، safety، quality، and regulatory compliance.

In this role، you will

Provide supervision، training، and guidance to reporting team members.

Act as deputy to the immediate supervisor when required.

Participate in projects to continuously improve Production Planning Services.

Materials Coordination

Provide recommendations on task withdrawals based on part availability and lead times that do not support the planned workflow.

Determine the best solution for material shortages and coordinate with the Material Organisation / FTM on part basic set-up.

or that suitable alternatives are sourced. Ensure all SSS and Task 2 components are dispatched with the required information.

Ensure all SSS and Task 2 components are dispatched with the required information.

Provide daily reports to Production Planning Engineers and production teams.

Monitor actual material usage against budget and provide feedback to production teams on opportunities to reduce material costs، including the return of unused parts.

Coordinate robbery activities for assigned events، ensuring robbery messages are issued and robbed parts are processed through the virtual robbery store to control R-Class costs.

Review material expenditure، including parts، quantities، and costs، and provide recommendations on future stock levels، contingency spare orders، and unusual ordering trends.

a. DBNU clean-up and feedback to the Planning Organisation to support future DBNU reduction.

b. Review material expenditure، including parts، quantities، and costs، and provide recommendations on future stock levels، contingency spare orders، and unusual ordering trends.

Work Pack Management

Deliver and supervise the preparation and compilation of work packages for assigned events، from handover by CAMO through to handover to the production team

Ensure all issues identified are followed up with the relevant departments and resolved before the start of each input.

Ensure work packs are displayed in the production area as required.

Return any non-compliant paperwork to Production for correction and log it for error reporting.

Generate a post-check completion report، distribute it to relevant stakeholders، and dispatch completed work packs to Technical Records.

Estimation

Produce detailed man-hour (MH) estimates for each assigned event to support workflow and manpower planning.

Perform defect analysis on completed inputs، focusing on non-routine estimation while considering check type، engine type، age، and in-service issues to determine technical impacts on future layovers.

Produce post-input man-hour analyses covering clocking performance and labour utilisation.

Review Production Planning feedback discrepancies and support Engineering departments by addressing documentation discrepancies، man-hour variances، and recommending improvements to AMM and other fleet-related manuals.

Workshops

Ensure all planned work is packaged، segregated into daily activities، and issued to Production

Maintain visibility of daily workload progress and update WO status to reflect material or resource shortages.

For SSS and Task 2 activities، highlight major defects and schedule impacts to the Workshop Engineer through effective and timely communication.

Coordinate the addition of PNs to the capability list as required.

Update and publish daily progress reports.

Monitor open WOs for man-hour utilisation، material status، and work progress، updating WO status daily as required.

Qualification

To be considered in this role، you must meet the below

Diploma in Engineering or Aircraft Maintenance، or Basic GCAA Licence، or Bachelor's Degree in Engineering (Aeronautical، Mechanical، or Electrical).

2.5 years of relevant experience in Aircraft/Engine Maintenance or Production Planning within an airline or third-party maintenance organisation، preferably in aircraft scheduling، maintenance planning، production planning، or a related environment

Candidates holding a Bachelor's Degree in Engineering must have at least 1.5 years of relevant experience.

Candidates holding a Diploma or Basic GCAA Licence must have at least 2.5 years of relevant experience.

Good understanding of aircraft/engine documentation and records، including Engine Maintenance Manuals (EMM)، Illustrated Parts Catalogues (IPC)، Work Packages، and Maintenance Schedules.

Knowledge of aircraft/engine systems، powerplants، and components.

and aviation legislation.

Working knowledge of the Ultramain system.

Proficiency in Microsoft Office applications.