Ensure appropriate application of certification privileges in accordance with the limitations of Company Authorisations

Key Responsibilities

• Job Purpose To ensure maintenance tasks and certification of aircraft during maintenance scheduled and unscheduled inputs are carried out to the highest possible standards of safety، quality and serviceability

• Job Outline: Generic: BUSINESS OBJECTIVE: To carry out aircraft maintenance/servicing tasks compliant to manufacturers & local safety procedures

• COST CONTROL: Ensure all off-aircraft tasks i.e. spares handling، robberies، hold items...etc. are handled strictly IAW Company procedures and all the relevant paperwork is actioned in a way that provides full transparency to all involved

• Ensure all staff allocated to him/her and themselves efficiently clock on/ clock off Job cards in the process of performing their usual duties

• Must be available to assume duties and

• To ensure maintenance tasks and certification of aircraft during maintenance scheduled and unscheduled inputs are carried out to the highest possible standards of safety، quality and serviceability

• Generic: BUSINESS OBJECTIVE: To carry out aircraft maintenance/servicing tasks compliant to manufacturers & local safety procedures

Requirements & Qualifications

• TRAINING: Attend training modules as and when required by the Company to enhance skills and understanding that will benefit the business

• Must have the right to work & live in India Knowledge/skills: Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards

• Knowledge/skills

Benefits & Conditions

• Position to be based in Hyderabad ( India) Salary & benefits Competitive Salary

• Salary & benefits

• Competitive Salary

Ensure that the assigned zones/aircraft are maintained IAW the documentation issued by approved authorities ensuring compliance is maintained to the latest revisions

This is applicable to all Technical Publications e.g

Aircraft documentation، Technical Notices، Quality Notices، Engineering Procedures Manual etc

Staff must ensure their personal approval/licensing

are valid and applicable to aircraft types worked through liaison with Quality Assurance/GCAA

Audit process and procedures to ensure the highest level of maintenance is achieved with the resources available

Ensure prompt attendance to all allocated aircraft arrival/departures with the intent to maximize the opportunities during ground time and avoid operational delays/disruptions

Determine that any tooling/equipment used is serviceable and appropriate for the task and should be able to understand and use specialized tooling where required

Robbery procedures used as a method to reduce costs and ensure a right-first-time pocket of good practice is formulated to ensure costs are reduced by avoiding multiple attempts to rectify defects

Ensure trouble shooting follows laid down procedures and all tools used to ensure that fault rectification is carried out in the most expedient and cost effective manner

To ensure that effective and efficient use of ordering of spares/ materials takes place and that as a result DBNUs are reduced to zero

RESOURCES: Ensure resources and manpower available is supportive of the business needs allowing targets/milestones set to be adequately met

To carry out any component changes as is necessary as part of the troubleshooting process and as directed by immediate supervisor

This will include the ability to obtain and understand AMM، IPC، or other Manufacturer/vendor documentation required to carry out the task

Ensure that available resources are utilised fully to meet the business needs

SAFETY: Ensure that all activities performed and personnel responsible for are ly monitored to ensure the best possible application of safety rules and regulations are applied ensuring full understanding and adherence to Company procedures

Staff must highlight deficiencies/

(whether for aircraft or hangar use) through the effective use of reporting tools in support of the overall quality improvement process and actively participate in propagating and enhancing the Group safety culture

Participate and promote in creating a safety culture in an effort to minimize accidents and highlight deficiencies/failures that can lead to such accidents

Ensure all work locations are kept clean and excellent housekeeping conditions are maintained

To avoid FOD، will be vigilant in ensuring work areas (including the ramp)، vehicles، stands، lockers and toolboxes are all kept clean

Responsible of being fully conversant with airport safety regulations including، holding and maintaining an airport driving permit

Should be fully conversant with airport manoeuvring area

and be able to fully comply

COMMUNICATIONS: Establish effective up-down rapport with Manager، Senior Engineers and sub-ordinates to maintain a seamless flow of information to highlight/detect and address any scenarios/events that might be disruptive to the operation

Ensure all relevant reports pertaining to issues of service delays، incidents and accidents، are completed in detail identifying all elements leading up to events

This includes completion of the necessary documentation including all relevant information that will allow rectification of defects by concerned sections through short-term maintenance planning

Additional reviews of all other activities/actions must be performed to allow process improvements to be implemented as necessary

HR REVIEWS: Responsible for conducting performance reviews for staff under their direct control through the fair and just application of the Performance Matters! tool

Deficiencies or inability to meet objectives/competencies must be highlighted during interim reviews and an agreed course of action implemented to improve/correct any issues identified

Each to be effective in guiding/coaching/counselling junior staff assigned to their team، including National and Expat Trainees، ensuring action and development plans are in place to address any areas of concern

of shift manager/senior engineer shift whenever delegated by the section manager

Required to undergo recurrent Human Factors Training، to comply with CAR 145

every 2 years

Ensure that any training courses attended are turned into approvals as required within 3.5 months from completion of attended course

ADAPTABILITY (Specific to EK engineering): Be available to be deployed anywhere throughout the EK operation including diversionary airfields to assist in the recovery process of an AOG (Aircraft on Ground)، and/or the aircraft/component manufacturers? facilities to act as EK Representative to oversee the final assembly of Emirates? new aircraft، supervise any outsourced maintenance work and assisting in the ance/delivery process

Also available for postings to outstations to support the needs of EK operations

Safety Sensitive role- Yes Working at height Yes Exposure to hazardous energy systems Yes Heavy lifting Yes Working in areas with motorised mobile equipment Yes Work in confined spaces Yes Contact with contaminations materials (Humans/Animals/Chemicals)Yes Contact with dangerous good Yes Work in an extremely noisy environment Yes Work in heat Yes Working with pressurised substances Yes Exposure to fixed protruding sharp objects Yes Exposure to contact with moving/falling objects Yes Airport driving permit Yes Other ( please specify) Qualification

& Experience: National / Higher National Diploma (12+2 or equivalent) or Apprenticeship in Mechanical، Electronic، Avionics or Aeronautical Engineering or equivalent training with a reputable airline or an approved maintenance organisation

Must have UAE GCAA/ ICAO Type II/ JAR 66 licence type rated in at least 2 Emirates aircraft types، in addition to company approvals. 9+ years in aviation maintenance environment with at least 2 years certifying experience as a license holder

Job Purpose

Ensure appropriate application of certification privileges in accordance with the limitations of Company Authorisations.

Job Outline

Ensure prompt attendance to all allocated aircraft arrival/departures with the intent to maximize the opportunities during ground time and avoid operational delays/disruptions.

To ensure that effective and efficient use of ordering of spares/ materials takes place and that as a result DBNUs are reduced to zero.

Ensure that available resources are utilised fully to meet the business needs.

and be able to fully comply.

Additional reviews of all other activities/actions must be performed to allow process improvements to be implemented as necessary.

of shift manager/senior engineer shift whenever delegated by the section manager.

every 2 years. Ensure that any training courses attended are turned into approvals as required within 3.5 months from completion of attended course.

Also available for postings to outstations to support the needs of EK operations.

Must have the right to work & live in India

Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.

Safety Sensitive role- Yes

Working at height Yes

Exposure to hazardous energy systems Yes

Heavy lifting Yes

Working in areas with motorised mobile equipment Yes

Work in confined spaces Yes

Contact with contaminations materials (Humans/Animals/Chemicals)Yes

Contact with dangerous good Yes

Work in an extremely noisy environment Yes

Work in heat Yes

Working with pressurised substances Yes

Exposure to fixed protruding sharp objects Yes

Exposure to contact with moving/falling objects Yes

Airport driving permit Yes

Other ( please specify)

Qualification

& Experience

National / Higher National Diploma (12+2 or equivalent) or Apprenticeship in Mechanical، Electronic، Avionics or Aeronautical Engineering or equivalent training with a reputable airline or an approved maintenance organisation.

Must have UAE GCAA/ ICAO Type II/ JAR 66 licence type rated in at least 2 Emirates aircraft types، in addition to company approvals.

9+ years in aviation maintenance environment with at least 2 years certifying experience as a license holder.

Position to be based in Hyderabad ( India)