Design Engineer III
Job description
Job Purpose The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets
Key Responsibilities
- Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment
- Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment.
Requirements & Qualifications
- As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures
- Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements
- Specific to Structures: Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment
- Specific to Cabin Interiors: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment
- Specific to Electrical and Avionics Systems: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements
- Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25
- As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures.
- Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements.
- Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment
- Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment
- Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements
- Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25.
Benefits & Conditions
- Salary & benefits Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world
- Salary & benefits
- Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world
We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort
Our skilled Engineers work ly with manufacturers and vendors to advance aircraft technologies
ETS includes Fleet Technical Management، GCAA/EASA Design Organisation، Maintenance Programmes & Configuration، and Technical Publications
We drive innovation and maintain top industry standards to ensure peak operational excellence
In this role you will: Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook
Preparation of Classification of changes to type certificate and repairs designed by the organisation
Preparation of compliance inspections and compile certification test plans، as required
Provide on-site support during the implementation of changes/repairs
Preparation of compliance checklist and update as required
Provide support and expertise to other Technical Services personnel، working on minor/major design changes or repairs
Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies
Work ly with outside vendors، MROs، regulatory authorities، and other stakeholders within the company، to create engineering solutions that exceeds expectations
Understand and interpret OEMs data (aircraft manuals، IPC/AMM/SRM/WDM/ESPM)، drawings، parts lists، reports) for both Airbus and Boeing
/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements
Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports
Experience with advanced FEM software such as Patran/Nastran or similar
Experience with advanced CAD software such as AutoCAD/Catia or similar
Working knowledge on Cabin Systems is preferred
Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment
Schematic and Wiring Diagrams / Harness / Wire routing installation drawings، and harness build up diagrams / Electrical load analysis (ELA) supplements / Functional Hazard Assessment، System Safety Assessment، EWIS Assessment / Test plans and reports / Compliance inspection plans / Equipment
Basic knowledge or training on Fundamental Avionics، RTCA DO-160، RTCA DO-178C، RTCA DO254 and System Safety Assessment
Experience with advanced CAD software such as AutoCAD Electrical or similar
Qualification To be considered for the role you must meet the below
Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent
At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval
Experience in Transport category Aeroplanes
Wide Body aircraft experience especially on Emirates fleet types is preferred
Experience as a Design Engineer (DE) and previous CVE experience is a plus
Experience with DOA on integrating cabin equipment (galleys، seats، wardrobes، safety equipment، other equipment) is preferred
Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project) Ability to analyse and synthesise technical information for implementation in cost effective ways
Find out what it’s like to live and work in our fast-paced، cosmopolitan home city in the Dubai Lifestyle section of our website
Job Purpose
The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets
We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort.
We drive innovation and maintain top industry standards to ensure peak operational excellence.
In this role you will
Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook
Preparation of compliance inspections and compile certification test plans، as required.
Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies.
Specific to Structures
/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements.
Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports.
Experience with advanced FEM software such as Patran/Nastran or similar. Experience with advanced CAD software such as AutoCAD/Catia or similar.
Specific to Cabin Interiors
Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment.
Specific to Electrical and Avionics Systems
Experience with advanced CAD software such as AutoCAD Electrical or similar.
Qualification
To be considered for the role you must meet the below
Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent.
At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval.
Experience in Transport category Aeroplanes.
Wide Body aircraft experience especially on Emirates fleet types is preferred.
Experience as a Design Engineer (DE) and previous CVE experience is a plus.
Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project)
Ability to analyse and synthesise technical information for implementation in cost effective ways.
You can connect directly with the employer via the verified options below or via quick apply.
Job match details
Advice before applying
Important questions before applying
How can I apply for Design Engineer III?
Review the job details, then use the available apply or contact button on the job page.
Where is this job located?
The job location is Emirates.
Is the salary listed?
The salary is not listed in the ad. You can ask about it when contacting or applying.
Do I need an account to apply?
An account helps you save jobs, track application status, and update your resume easily.
Design Engineer III
مجموعة طيران الإمارات (Emirates Group)
Job description
Job Purpose The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets
Key Responsibilities
- Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment
- Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment.
Requirements & Qualifications
- As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures
- Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements
- Specific to Structures: Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment
- Specific to Cabin Interiors: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment
- Specific to Electrical and Avionics Systems: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements
- Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25
- As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures.
- Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements.
- Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment
- Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment
- Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements
- Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25.
Benefits & Conditions
- Salary & benefits Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world
- Salary & benefits
- Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world
We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort
Our skilled Engineers work ly with manufacturers and vendors to advance aircraft technologies
ETS includes Fleet Technical Management، GCAA/EASA Design Organisation، Maintenance Programmes & Configuration، and Technical Publications
We drive innovation and maintain top industry standards to ensure peak operational excellence
In this role you will: Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook
Preparation of Classification of changes to type certificate and repairs designed by the organisation
Preparation of compliance inspections and compile certification test plans، as required
Provide on-site support during the implementation of changes/repairs
Preparation of compliance checklist and update as required
Provide support and expertise to other Technical Services personnel، working on minor/major design changes or repairs
Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies
Work ly with outside vendors، MROs، regulatory authorities، and other stakeholders within the company، to create engineering solutions that exceeds expectations
Understand and interpret OEMs data (aircraft manuals، IPC/AMM/SRM/WDM/ESPM)، drawings، parts lists، reports) for both Airbus and Boeing
/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements
Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports
Experience with advanced FEM software such as Patran/Nastran or similar
Experience with advanced CAD software such as AutoCAD/Catia or similar
Working knowledge on Cabin Systems is preferred
Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment
Schematic and Wiring Diagrams / Harness / Wire routing installation drawings، and harness build up diagrams / Electrical load analysis (ELA) supplements / Functional Hazard Assessment، System Safety Assessment، EWIS Assessment / Test plans and reports / Compliance inspection plans / Equipment
Basic knowledge or training on Fundamental Avionics، RTCA DO-160، RTCA DO-178C، RTCA DO254 and System Safety Assessment
Experience with advanced CAD software such as AutoCAD Electrical or similar
Qualification To be considered for the role you must meet the below
Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent
At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval
Experience in Transport category Aeroplanes
Wide Body aircraft experience especially on Emirates fleet types is preferred
Experience as a Design Engineer (DE) and previous CVE experience is a plus
Experience with DOA on integrating cabin equipment (galleys، seats، wardrobes، safety equipment، other equipment) is preferred
Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project) Ability to analyse and synthesise technical information for implementation in cost effective ways
Find out what it’s like to live and work in our fast-paced، cosmopolitan home city in the Dubai Lifestyle section of our website
Job Purpose
The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets
We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort.
We drive innovation and maintain top industry standards to ensure peak operational excellence.
In this role you will
Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook
Preparation of compliance inspections and compile certification test plans، as required.
Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies.
Specific to Structures
/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements.
Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports.
Experience with advanced FEM software such as Patran/Nastran or similar. Experience with advanced CAD software such as AutoCAD/Catia or similar.
Specific to Cabin Interiors
Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment.
Specific to Electrical and Avionics Systems
Experience with advanced CAD software such as AutoCAD Electrical or similar.
Qualification
To be considered for the role you must meet the below
Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent.
At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval.
Experience in Transport category Aeroplanes.
Wide Body aircraft experience especially on Emirates fleet types is preferred.
Experience as a Design Engineer (DE) and previous CVE experience is a plus.
Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project)
Ability to analyse and synthesise technical information for implementation in cost effective ways.
Application and contact
Design Engineer III
Choose an available application or contact method.
Job description
Read the job details and requirements before sending your application.
Job Purpose The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets
Key Responsibilities
- Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment
- Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment.
Requirements & Qualifications
- As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures
- Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements
- Specific to Structures: Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment
- Specific to Cabin Interiors: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment
- Specific to Electrical and Avionics Systems: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements
- Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25
- As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures.
- Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements.
- Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment
- Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment
- Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements
- Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25.
Benefits & Conditions
- Salary & benefits Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world
- Salary & benefits
- Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world
We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort
Our skilled Engineers work ly with manufacturers and vendors to advance aircraft technologies
ETS includes Fleet Technical Management، GCAA/EASA Design Organisation، Maintenance Programmes & Configuration، and Technical Publications
We drive innovation and maintain top industry standards to ensure peak operational excellence
In this role you will: Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook
Preparation of Classification of changes to type certificate and repairs designed by the organisation
Preparation of compliance inspections and compile certification test plans، as required
Provide on-site support during the implementation of changes/repairs
Preparation of compliance checklist and update as required
Provide support and expertise to other Technical Services personnel، working on minor/major design changes or repairs
Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies
Work ly with outside vendors، MROs، regulatory authorities، and other stakeholders within the company، to create engineering solutions that exceeds expectations
Understand and interpret OEMs data (aircraft manuals، IPC/AMM/SRM/WDM/ESPM)، drawings، parts lists، reports) for both Airbus and Boeing
/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements
Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports
Experience with advanced FEM software such as Patran/Nastran or similar
Experience with advanced CAD software such as AutoCAD/Catia or similar
Working knowledge on Cabin Systems is preferred
Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment
Schematic and Wiring Diagrams / Harness / Wire routing installation drawings، and harness build up diagrams / Electrical load analysis (ELA) supplements / Functional Hazard Assessment، System Safety Assessment، EWIS Assessment / Test plans and reports / Compliance inspection plans / Equipment
Basic knowledge or training on Fundamental Avionics، RTCA DO-160، RTCA DO-178C، RTCA DO254 and System Safety Assessment
Experience with advanced CAD software such as AutoCAD Electrical or similar
Qualification To be considered for the role you must meet the below
Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent
At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval
Experience in Transport category Aeroplanes
Wide Body aircraft experience especially on Emirates fleet types is preferred
Experience as a Design Engineer (DE) and previous CVE experience is a plus
Experience with DOA on integrating cabin equipment (galleys، seats، wardrobes، safety equipment، other equipment) is preferred
Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project) Ability to analyse and synthesise technical information for implementation in cost effective ways
Find out what it’s like to live and work in our fast-paced، cosmopolitan home city in the Dubai Lifestyle section of our website
Job Purpose
The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets
We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort.
We drive innovation and maintain top industry standards to ensure peak operational excellence.
In this role you will
Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook
Preparation of compliance inspections and compile certification test plans، as required.
Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies.
Specific to Structures
/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements.
Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports.
Experience with advanced FEM software such as Patran/Nastran or similar. Experience with advanced CAD software such as AutoCAD/Catia or similar.
Specific to Cabin Interiors
Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment.
Specific to Electrical and Avionics Systems
Experience with advanced CAD software such as AutoCAD Electrical or similar.
Qualification
To be considered for the role you must meet the below
Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent.
At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval.
Experience in Transport category Aeroplanes.
Wide Body aircraft experience especially on Emirates fleet types is preferred.
Experience as a Design Engineer (DE) and previous CVE experience is a plus.
Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project)
Ability to analyse and synthesise technical information for implementation in cost effective ways.
Match & discovery analysis
Medium match; review skills and gaps before applying.
- Listing is clear and comprehensive.
- Opportunity is highly fresh and active.
- Use category/role filters to improve results.
- Add a search keyword to measure text relevance.
Choose an available method
Contact data supplied by the advertiser is presented clearly, following the previous site contract.
Is this role right for you?
Review the quick signals before applying to improve your chances.
Apply with a clearer message
Write a short message that explains your experience and fit for the role.
- Review location, salary, and core requirements.
- Prepare a short message linked to the job and your experience.
- Apply through the available apply or contact button.
Sign in to apply without repeating your details
Your account helps you save jobs, track applications, and reuse your resume when applying.
- Prepare a short message that connects your experience to the job.
- Complete your resume so the employer sees a stronger profile.
Direct apply is unavailable for this listing
The previous site internal-apply condition is not met. Use an available contact method or external link.
View available contact methodsReport this listing
Use this form if the listing is inaccurate, misleading, or contains inappropriate content.
Logging in helps the review team follow up on your report when needed.
LoginImportant questions before applying
Short answers that help job seekers understand the listing quickly.
How can I apply for Design Engineer III?
Review the job details, then use the available apply or contact button on the job page.
Where is this job located?
The job location is Emirates.
Is the salary listed?
The salary is not listed in the ad. You can ask about it when contacting or applying.
Do I need an account to apply?
An account helps you save jobs, track application status, and update your resume easily.
Advice before applying
Selected articles to help you prepare your CV or application message for this job.
Similar opportunities
Annonces
Job brief: Nous offrons un poste de travail pour une assistante، dont le travail consiste a répondre، garder developper، la relation clients، par mail telephone …
Annonces
Job brief: Bonjour، Je recherche un concepteur technique expérimenté sur PolyBoard pour mon usine de fabrication de meubles Legacy Furniture، située à Alger.
Annonces
Job brief: Offre d’emploi : Déléguée commerciale – Confiserie et produits de pâtisserie
Annonces
Job brief: حابة تدخلي عالم التجارة الإلكترونية وتطوري دخلك؟
Annonces
Job brief: Déléguée commerciale – Confiserie et produits de pâtisserie
اعلان عن فرصة عمل بمدينة الجديدة بمناسبة افتتاح مطعم جديد بمدينة الجديدة، نعلن عن حاجتنا الى توظيف طباخ محترف في المأكولات الشرقية والتركية
Job brief: اتقان تحضير الأطباق التقليدية والعصرية وتقديمها بطريقة احترافية
Search paths related to this job
If "Design Engineer III" is not the right fit, use these links to find nearby opportunities by country, city or field.
Searches related to this page
Curated search links based on active job volume to improve browsing and discovery.